Installation Guide

- 15 -
Specifications
Input Current
12-48 VDC, 2.2-0.5 A
Input Voltage 12 to 48 VDC, redundant dual power inputs,
48 VDC Power over Ethernet
Power Consumption
28 W (max.)
Operating Temperature Wide Temp. Models: -40 to 75°C (-40 to
167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
NOTE
To meet the standard for IP68 protection, all unused ports
should be covered with the protective caps.
ATTENTION
The
AWK-4252A
is NOT a portable mobile device and should be
located at least 20 cm away from the human body.
The
AWK-4252A is NOT designed for the general public. To
en
sure that your AWK-4252A wireless network is safe and
configured correctly, consult a well
-trained technician to assist
with the installation process.
ATTENTION
Use the appropriate antennas for your wireless setup: Use 2.4
GHz antennas when the
AWK-4252A is configured for IEEE
802.11b/g/n. Use 5 GHz antennas when the
AWK-4252A is
configured for IEEE
802.11a/n/ac
. Make sure that the antennas
are located in an area
with a lightning and surge protection
system installed.
ATTENTION
Do not locate the antenna near overhead power lines or other
electric light or power circuits, or where it can come into
contact with such
circuits. When installing the antenna, take
extreme care not to come into contact with such circuits,
because they may cause serious injury or death. For proper
installation and grounding of the antenna, refer to national and
local co
des (for example, U.S.: NFPA 70; National Electrical
Code (NEC) Article 810;
Canada: Canadian Electrical Code,
Section 54).