Installation Guide

- 4 -

Mounting Dimensions

Wall Mounting

For some applications, it may be more convenient to mount the AWK-

4252A to a wall, as illustrated below.

STEP 1:

Align the wall

-mounting

plates to the wall

mounting

screw holes on the rear

panel, the

n attach the wall-

mounting plates with the

x 7.5 mm screws, as

shown in the adjacent

diagrams

STEP 2:

Mounting the

AWK-4252A to a wall requires 4

screws.

Use

the AWK-4252A device with the wall-mounting

plates attached as a guide to mark the correct

location of the

4 screws on the wall

. The heads of the

screws should be less than 6.0 mm in diameter, the

shafts should be less than 3.5 mm in diameter,

and

the

screw length should be at least 15 mm, as shown

in the figure on the right.