User's Manual

AirWorks AWK-5222 User’s Manual Web Console Configuration
3-11
NOTE
When you switch to Redundant Client, Client, or Slave mode, you can find an additional Site
Survey button on this page. It can support site survey and pop up a dialog box listing the
information of available APs, as shown in the following figure. You can click on the SSID of an
entity and bring the value of its SSID onto the SSID field of the Basic Wireless Settings page.
Clicking on the Refresh button will re-scan and update the table.
NOTE
If the Gateway field in Basic Settings Æ Network Settings is empty, a warning message will
appear, reminding you to set the default gateway when Client mode is enabled. You can ignore
this message if you are only planning a local network and no packet will be sent outside the
network.
RF type
Setting Description Factory Default
A Supports IEEE802.11a standard only
B Supports IEEE802.11b standard only
G Supports IEEE802.11g standard only
B/G Mixed Supports both of IEEE802.11b/g
standards, but 802.11g can be slowed
down when 802.11b clients are on the
network
B/G Mixed