User's Manual

AirWorks AWK-5222 User’s Manual Web Console Configuration
3-23
DTIM Interval (for Redundant AP, AP, Master mode only)
Setting Description Factory Default
Data Beacon Rate
(1-16384)
This value indicates how often the
AWK-5222 sends out a Delivery Traffic
Indication Message
1
Fragment threshold
Setting Description Factory Default
Fragment Length
(256-2346)
This parameter specifies the maximum size
a data packet before splitting and creating
another new packet
2346
RTS threshold
Setting Description Factory Default
RTS/CTS Threshold
(256-2346)
This setting determines how large a packet
can be before the Access Point coordinates
transmission and reception to ensure
efficient communication
2346
NOTE
You can refer to the related glossaries in Chapter 5 for more detailed information about the
above-mentioned settings. By setting these parameters properly, you can better tune the
performance of your wireless network.
Transmission distance
Setting Description Factory Default
Distance or max. range
for transmission
(500-10000m)
The distance specifies the transmission
distance or max. range between two AWK
devices. This parameter should be set
properly, especially for long-distance
communication.
500
Transmission enhancement
Setting Description Factory Default
Enable/Disable This setting can enhance communication by
strengthening the AWK-5222’s
transmission power. It is quite useful for
long-distance transmission or countering
environmental interference. The user has to
carefully evaluate and measure the
transmission power of whole system, and
make sure it is still below the regulative
limitation.
Disable