User's Manual

AirWorks AWK-5222 User’s Manual Web Console Configuration
3-37
System-related events Event is triggered when…
System restart (warm start)
The AWK-5222 is rebooted, such as when its settings
are changed (IP address, subnet mask, etc.).
Network-related events Event is triggered when…
LAN link on The LAN port is connected to a device or network.
LAN link off
The port is disconnected (e.g., the cable is pulled out,
or the opposing device shuts down).
Client joined/ left
(for Redundant AP, AP, or
Master mode)
A wireless client is associated or disassociated.
WLAN connected to AP
(for Redundant Client, Client,
or Slave mode)
The AWK-5222 is associated with an AP.
WLAN disconnected
(for Redundant Client, Client,
or Slave mode)
The AWK-5222 is disassociated from an AP.
Config-related events Event is triggered when…
Configuration Changed A configuration item has been changed.
Configuration file import via Web
Console
The configuration file is imported to the AWK-5222.
Console authentication failure An incorrect password is entered.
Firmware upgraded The AWK-5222’s firmware is updated.
Power events Event is triggered when…
Power 1/2 transition (On Æ Off) The AWK-5222 is powered down in PWR1/2.
PoE transition (On Æ Off) The AWK-5222 is powered down in PoE.
Power 1/2 transition (Off Æ On) The AWK-5222 is powered via PWR1/2.
PoE transition (Off Æ On) The AWK-5222 is powered via PoE.
DI events Event is triggered when…
DI1/2 transition (On Æ Off) Digital Input 1/2 is triggered by on to off transition
DI1/2 transition (Off Æ On) Digital Input 1/2 is triggered by off to on transition