User's Manual

AirWorks AWK-5222 User’s Manual Introduction
1-5
Functional Design
LED Indicators
The LEDs on the front panel of AWK-5222 allow you to identity the status and wireless settings
quickly.
LED Color State Description
Front Panel LED Indicators (System)
On Power is being supplied from power input 1.
PWR1
Green
Off
Power is not being supplied from power input
1.
On Power is being supplied from power input 2.
PWR2
Green
Off
Power is not being supplied from power input
2.
On Power is being supplied via PoE.
PoE
Amber
Off Power is not being supplied via PoE.
On Relay is on.
Quick Blinking
Cannot get an IP address from the DHCP
server (interval: 1 sec)
Slow Blinking IP address conflict (interval: 0.5 sec)
FAULT
Red
Off Relay is off.
Green Software Ready
Blinking Green
The AWK has been located by AWK Search
Utility (interval: 1sec)
STATE
Green/Red
Red Booting or Error condition
Green On WLAN1 functions in Client mode.
Blinking Green
WLAN1’s data communication is running in
Client mode
(interval: 1 sec)
Amber On WLAN1 functions in AP/Bridge mode.
Blinking
Amber
WLAN1’s data communication is running in
AP/Bridge mode
(interval: 1 sec)
WLAN1
Green/Amber
Off WLAN1 is not in use.
Green On WLAN2 function is in Client mode.
Blinking Green
WLAN2’s data communication is running in
Client mode
(interval: 1 sec)
Amber On WLAN2 function is in AP/Bridge mode.
Blinking
Amber
WLAN2’s data communication is running in
AP/Bridge mode
(interval: 1 sec)
WLAN2
Green/Amber
Off WLAN2 is not in use.
TP Port (LAN1, LAN2) LED Indicators (Port Interface)
On TP port’s 10 Mbps link is active.
Blinking Data is being transmitted at 10 Mbps
10M
Yellow
Off TP port’s 10 Mbps link is inactive.
On TP port’s 100 Mbps link is active.
Blinking Data is being transmitted at 100 Mbps
100M
Green
Off TP port’s 100 Mbps link is inactive.