User's Manual

AirWorks AWK-3121 User’s Manual Web Console Configuration
Enable
Setting Description Factory Default
Enable Enables IP protocol filter
Disable Disables IP protocol filter
Disable
Policy
Setting Description Factory Default
Accept Only the packets fitting the entities on
the list can be allowed
Drop Any packet fitting the entities on the
list will be denied
Drop
ATTENTION
Be careful when you enable the filter function:
Drop + “no entity on list is activated” = all packets are allowed.
Accept + “no entity on list is activated” = all packets are denied.
TCP/UDP Port Filter
The AWK-3121’s TCP/UDP port filter is a policy-based filter that can allow or filter out
TCP/UDP-based packets with a specified source or destination port.
The AWK-3121 provides 8 entities for setting the range of source/destination ports of a specific
protocol. In addition to selecting TCP or UDP protocol, you can set either the source port,
destination port, or both. The end port can be left empty if only a single port is specified. Of course,
the end port cannot be larger then the start port.
The Application name is a text string that describes the corresponding entity with up to 31
characters. Remember to check the Active check box for each entity to activate the setting.
3-25