User's Manual

AirWorks AWK-3121 User’s Manual Web Console Configuration
RSTP status
This field will appear only when selected to operate STP/RSTP. It indicates whether this
AWK-3121 is the Root of the Spanning Tree (the root is determined automatically) or not.
Bridge priority
Setting Description Factory Default
Numerical value
selected
by user
You can increase the bridge priority
by selecting a lower number. A
higher bridge priority brings a greater
chance of being established as the
root of the Spanning Tree topology.
32768
Hello time
Setting Description Factory Default
Numerical value input
by user
(1 – 10 seconds)
The root of the Spanning Tree
topology periodically sends out a
“hello” message to other devices on
the network to check if the topology
is healthy. Hello time indicates how
often the root sends hello messages.
2 (seconds)
Forwarding delay
Setting Description Factory Default
Numerical value input
by user
(4 – 30 seconds)
The amount of time this device waits
before checking to see if it should
change to a different topology.
15 (seconds)
Max. age
Setting Description Factory Default
Numerical value input
by user
(6 – 40 seconds)
As a non-root role, if the device has
not received a hello message from
the root longer than Max. age, it will
reconfigure itself as a root. Once two
or more devices on the network are
recognized as a root, the devices will
renegotiate to set up a new Spanning
Tree topology.
20 (seconds)
3-27