User's Manual

AirWorks AWK-3121 User’s Manual Web Console Configuration
Password
You can change the administration password for each of the AWK-3121’s console managers by
using the Password function. Before you set up a new password, you must input the current
password and reenter the new password for confirmation. For your security, do not use the default
password root, and remember to change the administration password regularly.
Save Configuration
The following figure shows how the AWK-3121 stores the setting changes into volatile and
non-volatile memory. All data stored in volatile memory will disappear when the AWK-3121 is
shutdown or rebooted unless they are y. Because the AWK-3121 starts up and initializes with the
settings stored in flash memory, all new changes must be saved to flash memory before restarting
the AWK-3121.
This also means the new changes will not work unless you run either the Save Configuration
function or the Restart function.
After you click on Save Configuration in the left menu box, the following screen will appear.
Click Save if you wish to update the configuration settings in the flash memory at this time.
Alternatively, you may choose to run other functions and put off saving the configuration until
later. However, the new setting changes will remain in the non-volatile memory until you save the
configurations.
3-41