User`s manual

Introduction
Industio CI-132 Series User’s Manual 1-5
Check List
Upon unpacking the Industio CI-132 Series package, you should find the following
items:
v Industio CI-132 Series 2 port serial board
v Device driver diskettes:
l Windows NT and Windows 95/98¡Ñ1
l PComm Lite¡Ñ1
l DOS¡Ñ1
v Industio CI-132 Series User’s Manual (This manual)
Installation Guide
This section gives a brief summary of how to install the Industio CI-132 Series under
each supported operating system. The installation is simple and involves the
following stages:
Configure CI-132 Series with Io-irq.exe See chapter 2
Install the CI-132 Series board
Install the software from the diskette See respective O.S. Section
Configure the driver for the board and ports in chapter 3
Connect the devices with the cable See chapter 5 for cable wiring
Restart the system See chapter 3 for board init.
Check the driver initialization status status checking for each O.S.
If the system restart successfully, you may
Develop your applications or See chapter 4, “Serial
Execute the desired applications Programming Tools”