User`s manual

Software Installation
Industio CI-132 Series User’s Manual 3-15
In this configuration panel, you may:
l Click [Property] to enter “Property” dialog box to configure the selected
board with the correct “COM Number”, “INT Vector”, “Interrupt No” and
“Base I/O Port Address”. Please see
steps 5 to 7 in the previous section,
“Installing Driver”, for more details, except that the “Board Type” field is not
supposed to be changed.
l Click [Add] to add one more board that is not yet configured in the system.
Please see
steps 5 to 7 in the previous section, “Installing Driver”, for more
details.
l Click [Remove] to remove the board currently selected from the configured
board list.
l Click [OK] to confirm the configuration changes you made.
l Click [Cancel] to leave the dialog with the configuration unchanged.
Updating Driver
Open [Control Panel] icon, and then [System] icon, and then select [Device
Manager
] tab. Then select and open the “MOXA Smartio/Industio Family”
option and then select the “CI-132 Series”. Click on [Properties] button and then
select [
Device Driver] tab and then click on [Update Driver] button.