User`s manual

3
3
Chapter 3 Software Installation
This chapter gives installation, configuration, and update/removal procedures for the driver for
Windows 2000, Windows 2003/XP/Vista/2008 (32-bit/64-bit), DOS, Linux (32-bit/64-bit), and
SCO, and WinCE 5.0. Before proceeding with the software installation, complete the hardware
installation discussed in the previous chapter, “Hardware Installation.”
Refer to the next chapter, “Serial Programming Tools,” for information about developing your
own serial programming applications. Note that you can install up to 4 PCI Express boards in one
system, provided sufficient I/O address and IRQ number resources are available.
You can download the Windows 2000/XP/2003/Vista/2008, DOS, Linux, and SCO, and WinCE
5.0 drivers from the Moxa website.
This chapter covers the following topics:
 Windows Drivers
¾ Windows 2008/Vista (32-bit/64-bit)
¾ Windows 2003/XP (32-bit/64-bit)
¾ Windows 2000
 Non-Windows Drivers
¾ DOS
¾ Linux (32-bit/64-bit)
¾ SCO
 Windows CE 5.0
¾ Installing the driver