PCI Express Multiport Serial Board Series Quick Installation Guide Version 2.1, December 2019 Technical Support Contact Information www.moxa.
Overview Moxa’s new PCI Express Multiport Serial Boards series is designed for POS and ATM applications and for use by industrial automation system manufacturers and system integrators.
. 2.3. Verify the driver status Use the Moxa diagnostic utility to verify the driver status: #cd /moxa/mxser/utility/diag #./msdiag 2.4. Test the tty port Use the Moxa terminal utility to test the tty ports: #cd /moxa/mxser/utility/term #./msterm Intelligent RS-485 (If your multiport serial board is CP-102E/CP102EL, CP-132EL/CP-132EL-I, or CP-114EL/CP-114EL-I, then your software installation is completed.
Pin Assignments CP-102E / CP-102EL Male DB9 (CBL-M25M9x2-50 for CP-102EL) Pin 1 2 3 4 5 6 7 8 DB9 male RS-232 DCD RxD TxD DTR GND DSR RTS CTS CP-132EL/CP-132EL-I Male DB9 (Device side) Pin 1 2 3 4 5 6 7 8 RS-422/ RS-485-4W TxD-(A) TxD+(B) RxD+(B) RxD-(A) GND – – – RS-485-2W DB9 male – – Data+(B) Data+(A) GND – – – CP-114EL/CP-114EL-I Male DB9 (CBL-M44M9x4-50) Pin RS-232 1 2 3 4 5 6 7 8 DCD RxD TxD DTR GND DSR RTS DCD RS-422/ RS-485-4W TxD-(A) TxD+(B) RxD+(B) RxD-(A) GND – – – RS-485-2W DB9 mal
CP-118E-A-I / CP-138E-A-I Male DB9 (CBL-M78M9x8-100) Pin RS-232 1 2 3 4 5 6 7 8 DCD RxD TxD DTR GND DSR RTS CTS RS-422/ RS-485-4W TxD-(A) TxD+(B) RxD+(B) RxD-(A) GND – – – RS-485-2W DB9 male – – Data+(B) Data-(A) GND – – – Male DB25 (CBL-M78M25x8-100) Pin RS-232 2 3 4 5 6 7 8 20 TxD RxD RTS CTS DSR GND DCD DTR RS-422/ RS-485-4W RxD+(B) TxD+(B) – – – GND TxD-(A) RxD-(A) RS-485-2W DB25 male Data+(B) – – – – GND – Data-(A) CP-134EL-A-I Male DB9 (CBL-M44M9x4-50) Pin RS-232 1 2 3 4 5 6 7 8 DCD
CP-116E-A Male DB9 (OPT8-M9+ / CBL-M68M9x8-100) Pin RS-232 1 2 3 4 5 6 7 8 DCD RxD TxD DTR GND DSR RTS CTS RS-422/ RS-485-4W TxD-(A) TxD+(B) RxD+(B) RxD-(A) GND – – – RS-485-2W DB9 male – – Data+(B) Data-(A) GND – – – Male DB25 ( OPT8B+ / CBL-M68M25x8-100) Pin RS-232 2 3 4 5 6 7 8 20 TxD RxD RTS CTS DSR GND DCD DTR RS-422/ RS-485-4W RxD+(B) TxD+(B) – – – GND TxD-(A) RxD-(A) RS-485-2W DB25 male Data+(B) – – – – GND – Data-(A) Female DB25 (OPT8A+/S+) Pin RS-232 2 3 4 5 6 7 8 20 RxD TxD CTS