User`s manual

Industrial Secure Router User's Manual Virtual Private Network (VPN)
9-9
NOTE
The default setting for Certificate Day is 0, which means that the certification will not be terminated unless
modified by the user.
Certificate Setting
After Root Certification is activated, the user can generate different certifications for different VPN Tunnels. The
user needs to fill in the following information and press Add and Activate to add the new certificate to the
Certificate List.
• Certificate Days
• Organization Unit Name
• Certificate Name
• Email Address
• Certificate Password
The user can then choose certificates from the list and press the PKCS#12 Export button to generate a .p12
file for a local certificate and press Certificate Export to generate a .crt file for certificates on a Remote VPN
gateway.
Local Certificate Upload
Upload the .p12 local certificate on this page. The Password must be the same as the .p12 certificate file. If the
password is not correct, the certificate import process will fail.
Label: User defined name for this local certificate
Name/Subject: Show the Name and subject when the certificate is imported successfully or the user selects
the certificate on the list
PKCS#12 Upload: Use Browser to select the .p12 file and press the Import button
Import Password: The Password for the .p12 certificate