User`s manual

Industrial Secure Router User's Manual EDR-810 Series Features and Functions
3-10
System Event Settings
System Events are related to the overall function of the switch. Each event can be activated independently with
different warning approaches. Administrator also can decide the severity of each system event.
System Events Description
Cold Start Power is cut off and then reconnected.
Warm Start Moxa industrial secure router is rebooted, such as when network
parameters are changed (IP address, subnet mask, etc.).
Power Transition (OnOff)
Moxa industrial secure router is powered down.
Power Transition (OffOn)
Moxa industrial secure router is powered up.
DI (Off) Digital input state is “0”
DI (On) Digital input state is “1”
Configuration Change Any configuration item has been changed
Authentication Failure An incorrect password was entered.
There are four response actions available on the EDS E series when events are triggered.
Action Description
Trap The industrial secure router will send notification to the trap server when event is triggered
E-Mail The industrial secure router will send notification to the email server defined in the Email
Setting
Syslog The industrial secure router will record a syslog to syslog server defined in Syslog Server
Setting
Relay The industrial secure router supports digital inputs to integrate sensors. When event is
triggered, the device will automate alarms by relay output
Severity
Severity Description
Emergency System is unusable
Alert Action must be taken immediately
Critical
Critical conditions
Error Error conditions
Warning Warning conditions
Notice Normal but significant condition
Information Informational messages
Debug Debug-level messages