User`s manual

Industrial Secure Router User's Manual EDR-810 Series Features and Functions
3-14
If the user enables the SettingCheck function with the Accessible IP list and the confirmer Timer is set to 15
seconds, then when the user clicks the Activate button on the accessible IP list page, the Industrial Secure
Router will execute the configuration change and the web browser will try to jump to the SettingCheck
Confirmed page automatically. Because the new IP list does not include the Remote user’s IP address, the
remote user cannot connect to the SettingCheck Confirmed page. After 15 seconds, the Industrial Secure
Router will roll back to the original Accessible IP List setting, allowing the remote user to reconnect to the
Industrial Secure Router and check what’s wrong with the previous setting.
If the new configuration does not block the connection from the remote user to the Industrial Secure Router,
the user will see the SettingCheck Confirmed page, shown in the following figure. Click Confirm to save the
configuration updates.
System File Update—by Remote TFTP
The Industrial Secure Router supports saving your configuration file to a remote TFTP server or local host to
allow other Industrial Secure Routers to use the same configuration at a later time, or saving the Log file for
future reference. Loading pre-saved firmware or a configuration file from the TFTP server or local host is also
supported to make it easier to upgrade or configure the Industrial Secure Router.