Installation Guide

- 2 -
Overview
The EDS-2008-EL/ELP Series has an 8-port combination to simplify
network expansion. There are two housing types available for the user
to select depending on the requirements of their application. The ELP
has a plastic housing and the EL has a metal housing. The compact
switches provide a cost-effective solution for your industrial Ethernet
connection requirements.
The EDS-2008-EL/ELP Series provides 12/24/48 VDC (9.6 to 60 VDC)
power input, and the switches are available with a standard operating
temperature range from -10 to 60°C, or with a wide operating
temperature range from -40 to 75°C (only available for the –T models
in the EL Series). The switches are rugged enough to operate reliably in
harsh industrial environments.
To provide greater versatility for use with applications from different
industries, the EDS-2008-EL/ELP Series also allows users to enable or
disable broadcast storm protection (BSP), Quality of Service (QoS)
function via the DIP switches on the top panel.
The EDS-2008-EL/ELP switches can be easily installed with DIN-rail
mounting as well as distribution boxes. The DIN-rail mounting
capability and IP40 housing with LED indicators ensure that the plug-
and-play EDS-2008-EL/ELP switches are reliable and easy to use.
NOTE
Throughout this Quick Installation Guide, we use EDS as an
abbreviation for Moxa EtherDevice Switch:
EDS = Moxa EtherDevice Switch
ATTENTION
This device complies with part 15 of FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operations.
Package Checklist
Your EDS is shipped with the following items. If any of these items are
missing or damaged, please contact your customer service
representative for assistance.
• Moxa EtherDevice™ Switch
• Quick installation guide (printed)
• Warranty card