Installation guide

- 8 -
EDS-616/EDS-619
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate should already be fixed to the
back panel of the EDS-600 when you take it out of the box. If you need to
reattach the DIN-Rail attachment plate to the EDS-600, be sure the
spring-loaded bracket is situated towards the bottom, as shown in the
following figures.
STEP 1: If the spring-loaded bracket is locked in place, push the recessed
button to release it. Once released, you should feel some resistance from
the spring as you slide the bracket up and down a few millimeters in each
direction.