Datasheet

ManualsBrandsMoxa ManualsAutomationEthernet Switch, RJ45 Ports 4, Fibre Ports 1SFP, 1Gbps, Unmanaged

www.moxa.com

EDS-G205 Series

5G-port full Gigabit unmanaged Ethernet switches

Features and Benefits

• Fiber-optic options for extending distance and improving electrical noise

immunity

• Redundant dual 12/24/48 VDC power inputs

• Supports 10 KB jumbo frames

• Relay output warning for power failure and port break alarm

• Broadcast storm protection

• -40 to 75°C operating temperature range (-T models)

Certifications

Introduction

The EDS-G205-1GTXSFP switches are equipped with 5 Gigabit Ethernet ports and 1 fiber-optic port, making them ideal for applications that

require high bandwidth. The EDS-G205-1GTXSFP switches provide an economical solution for your industrial Gigabit Ethernet connections, and

the built-in relay warning function alerts network managers when power failures or port breaks occur. The 4-pin DIP switches can be used for

controlling broadcast protection, jumbo frames, and IEEE 802.3az energy saving. In addition, 100/1000 SFP speed switching is ideal for easy on-

site configuration for any industrial automation application.

A standard-temperature model, which has an operating temperature range of -10 to 60°C, and a wide-temperature range model, which has an

operating temperature range of -40 to 75°C, are available. Both models undergo a 100% burn-in test to ensure that they fulfill the special needs of

industrial automation control applications. The switches can be installed easily on a DIN rail or in distribution boxes.

Specifications

Input/Output Interface

Alarm Contact Channels 1 relay output with current carrying capacity of 1 A @ 24 VDC

Ethernet Interface

10/100/1000BaseT(X) Ports (RJ45 connector) 4

Auto negotiation speed

Full/Half duplex mode

Auto MDI/MDI-X connection

Combo Ports (10/100/1000BaseT(X) or 100/

1000BaseSFP+)

Standards IEEE 802.3 for 10BaseT

IEEE 802.3ab for 1000BaseT(X)

IEEE 802.3u for 100BaseT(X) and 100BaseFX

IEEE 802.3x for flow control

IEEE 802.3z for 1000BaseX

IEEE 802.3az for Energy-Efficient Ethernet

Switch Properties

MAC Table Size 8 K

Packet Buffer Size 1 Mbits

Summary of content (5 pages)

PAGE 1
EDS-G205 Series 5G-port full Gigabit unmanaged Ethernet switches Features and Benefits • Fiber-optic options for extending distance and improving electrical noise immunity • Redundant dual 12/24/48 VDC power inputs • Supports 10 KB jumbo frames • Relay output warning for power failure and port break alarm • Broadcast storm protection • -40 to 75°C operating temperature range (-T models) Certifications Introduction The EDS-G205-1GTXSFP switches are equipped with 5 Gigabit Ethernet ports and 1 fiber-optic
PAGE 2
Jumbo Frame Size 10 KB Processing Type Store and Forward DIP Switch Configuration Ethernet Interface Broadcast storm protection, Jumbo Frame, IEEE 802.3az energy saving, 100/1000 SFP speed switching, Port break alarm Power Parameters Connection 1 removable 6-contact terminal block(s) Input Voltage 12/24/48 VDC, Redundant dual inputs Operating Voltage 9.6 to 60 VDC Reverse Polarity Protection Supported Input Current 0.
PAGE 3
MTBF Time 2,823,446 hrs Standards Telcordia (Bellcore), GB Warranty Warranty Period 5 years Details See www.moxa.com/warranty Package Contents Device 1 x EDS-G205 Series switch Installation Kit 1 x cap, plastic, for SFP slot Documentation 1 x quick installation guide 1 x warranty card Note SFP modules need to be purchased separately for use with this product.
PAGE 4
SFP-1FEMLC-T SFP module with 1 100Base multi-mode with LC connector for 4 km transmission, -40 to 85°C operating temperature SFP-1FESLC-T SFP module with 1 100Base single-mode with LC connector for 40 km transmission, -40 to 85°C operating temperature SFP-1G10ALC WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1310 nm, RX 1550 nm, 0 to 60°C operating temperature SFP-1G10ALC-T WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km
PAGE 5
Power Supplies DR-120-24 120W/2.5A DIN-rail 24 VDC power supply with universal 88 to 132 VAC or 176 to 264 VAC input by switch, or 248 to 370 VDC input, -10 to 60°C operating temperature DR-4524 45W/2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC or 120 to 370 VDC input, -10 to 50° C operating temperature DR-75-24 75W/3.2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC or 120 to 370 VDC input, -10 to 60°C operating temperature MDR-40-24 DIN-rail 24 VDC power supply with 40W/1.