Datasheet

www.moxa.com
1
EDS-P206A Series
6-port unmanaged Ethernet switches with 4 IEEE 802.3af/at PoE+ ports
Features and Benefits
IEEE 802.3af/at compliant PoE and Ethernet combo ports
Up to 30 W output per PoE port
12/24/48 VDC redundant power inputs
Intelligent power consumption detection and classification
Redundant dual VDC power inputs
-40 to 75°C operating temperature range (-T models)
Certifications
Introduction
The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The
switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the
power supply and provide up to 30 watts of power per port.
The switches can be used to power IEEE 802.3af/at-compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE
802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet
network.
Specifications
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector) EDS-P206A-4PoE Series: 2
EDS-P206A-4PoE-M-SC/M-ST/S-SC Series: 1
Supported functions:
Auto negotiation speed
Full/Half duplex mode
Auto MDI/MDI-X connection
100BaseFX Ports (multi-mode SC connector) EDS-P206A-4PoE-M-SC Series: 1
EDS-P206A-4PoE-MM-SC Series: 2
100BaseFX Ports (multi-mode ST connector) EDS-P206A-4PoE-M-ST Series: 1
EDS-P206A-4PoE-MM-ST Series: 2
100BaseFX Ports (single-mode SC connector) EDS-P206A-4PoE-S-SC/P206A-4PoE-S-SC-T: 1
EDS-P206A-4PoE-SS-SC/P206A-4PoE-SS-SC-T: 2
PoE Ports (10/100BaseT(X), RJ45 connector) 4
Standards IEEE 802.3 for 10BaseT
IEEE 802.3af/at for PoE/PoE+ output
IEEE 802.3x for flow control
IEEE 802.3u for 100BaseT(X)

Summary of content (5 pages)