User Manual

- 11 -
ST-Port Pinouts
ST-Port to ST-Port Cable Wiring
ATTENTION
This is a Class 1 Laser/LED product. To avoid causing serious
damage to your eyes, do not stare directly into the Laser Beam.
Redundant Power Inputs
Both power inputs can be connected simultaneously to live DC power
sources. If one power source fails, the other live source acts as a backup,
and automatically supplies all of the EDS’s power needs.
DIP Switch Settings
The default
setting for each DIP Switch is
O
FF. The following table explains the effect
of setting the DIP Switches to the O
N
positions.
DIP Switch
Setting
Description
–
–
Serves no function (reserved for future use).
BSP
ON
Enables broadcast storm protection
OFF
Disables broadcast storm protection
ATTENTION
To actively update DIP switch settings, power off and then power
on the EDS.