User Manual

- 6 -
Mounting Dimensions
Unit = mm (inch)
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate should already be fixed to the
back panel of the EDS when you take it out of the box. If you need to
reattach the DIN-Rail attachment plate, make sure the stiff metal spring
is situated towards the top, as shown in the figures below.
STEP 1:
Insert the top of the
DIN
-Rail into the slot just
below the stiff metal spring.
STEP
2: The DIN-Rail attachment
unit will snap into place as shown
below.
To remove the EDS from the DIN-Rail, reverse Steps 1 and 2 above.