User`s manual

EDS-P510 Series Featured Functions
3-3
Password
The EDS-P510 provides two levels of access privilege: admin privilege gives read/write access to all EDS-P510
configuration parameters, and user privilege provides read access only. You will be able to view the
configuration, but will not be able to make modifications.
ATTENTION
The EDS-P510’s default Password is not set (i.e., is blank). If a Password is already set, then you will be
required to type the Password when logging into the RS-232 console, Telnet console, or web browser
interface.
Account
Setting Description Factory Default
admin “admin” privilege allows the user to modify all EDS-P510
configurations.
user “user” privilege only allows viewing EDS-P510 configurations.
admin
Password
Setting Description Factory Default
Old Password
(Max. 16 Characters)
Type current password when changing the password None
New Password
(Max. 16 Characters)
Type new password when changing the password None
Retype Password (Max.
16 Characters)
If you type a new password in the Password field, you will be
required to retype the password in the Retype new password
field before updating the new password.
None
Accessible IP
The EDS-P510 uses an IP address-based
filtering method to control access to the
EDS-P510 units.