User`s manual

EDS-P510 Series Featured Functions
3-6
See a brief explanation of each
configuration item below.
Auto IP Configuration
Setting Description Factory Default
Disable Set up the EDS-P510’s IP address manually.
By DHCP The EDS-P510’s IP address will be assigned automatically by
the network’s DHCP server.
By BOOTP The EDS-P510’s IP address will be assigned automatically by
the network’s BOOTP server.
Disable
Switch IP Address
Setting Description Factory Default
IP Address of the
EDS-P510
Identifies the EDS-P510 on a TCP/IP network. 192.168.127.253
Switch Subnet Mask
Setting Description Factory Default
Subnet mask of the
EDS-P510
Identifies the type of network to which the EDS-P510 is
connected (e.g., 255.255.0.0 for a Class B network, or
255.255.255.0 for a Class C network).
255.255.255.0
Default Gateway
Setting Description Factory Default
Default Gateway of the
EDS-P510
The IP address of the router that connects the LAN to an outside
network.
None
DNS IP Address
Setting Description Factory Default
1st DNS Server’s
IP Address
The IP address of the DNS Server used by your network. After
entering the DNS Server’s IP address, you can input the
EDS-P510’s URL (e.g., www.eds.company.com) in your
browser’s address field,
instead of entering the IP address.
None
2nd DNS Server’s
IP Address
The IP address of the DNS Server used by your network. The
EDS-P510 will try to locate the 2nd DNS Server if the 1st DNS
Server fails to connect.
None
Global Unicast Address Prefix (Prefix Length: 64 bits)
Setting Description Factory Default
Global Unicast Address
Prefix
The prefix value must be formatted according to RFC 2373
“IPv6 Addressing Architecture,” using 8 colon-separated 16-bit
hexadecimal values. One double colon may be used in the
address to indicate the appropriate number of zeros required to
fill the undefined fields.
None