User`s manual

EDS-P510 Series Featured Functions
3-13
System File Update—By Remote TFTP
The EDS-P510 supports saving your configuration file to a remote TFTP server or local host to allow other
EDS-P510 switches to use the same configuration at a later time, or saving the Log file for future reference.
Loading pre-saved firmware or a configuration file from the TFTP server or local host is also supported for easy
upgrading or configuration of the EDS-P510.
TFTP Server IP/Name
Setting Description Factory Default
IP Address of TFTP
Server
The IP or name of the remote TFTP server. Must be set up
before downloading or uploading files.
None
Configuration Files Path and Name
Setting Description Factory Default
Max. 40 Characters The path and file name of the EDS-P510’s configuration file in
the TFTP server.
None
Firmware Files Path and Name
Setting Description Factory Default
Max. 40 Characters The path and file name of the EDS-P510’s firmware file. None
Log Files Path and Name
Setting Description Factory Default
Max. 40 Characters The path and file name of the EDS-P510’s log file None
After setting up the desired path and file name, click Activate to save the setting, and then click Download to
download the prepared file from the remote TFTP server, or click Upload to upload the desired file to the
remote TFTP server.
System File Update—By Local Import/Export
Configuration File
To export the configuration file of this EDS-P510, click Export to save it to the local host.
Log File
To export the Log file of this EDS-P510, click Export and save it to the local host.