User`s manual

EDS-P510 Series Featured Functions
3-20
2nd Trap Server IP/Name
Setting Description Factory Default
IP or name Specifies the IP address or name of the secondary trap server
used by your network.
None
2nd Trap Community
Setting Description Factory Default
Max. 30 characters Specifies the community string to use for authentication. Public
Using PoE
Power over Ethernet has become increasingly popular due in large part to the reliability provided by PoE
Ethernet switches that supply the necessary power to Powered Devices (PD) when AC power is not readily
available or cost-prohibitive to provide locally.
Power over Ethernet can be used with:
• Surveillance cameras
• Security I/O sensors
• Industrial wireless access points
• Emergency IP phones
In fact, it’s not uncommon for video, voice, and high-rate industrial application data transfers to be integrated
into one network. Moxa’s EDS-P510 is equipped with many advanced PoE management functions, providing
vital security systems with a convenient and reliable Gigabit Ethernet network.
PoE Setting
The settings are included to give the user control over the system’s PoE power budget, PoE port access, PoE
port power limit and PD failure check.
An explanation of each configuration item follows:
PoE Power Budget
Indicates the PoE power that can be supplied by the system.
Setting Description Factory Default
Auto Allows users to set the actual Power Limit value by each
individual PoE port.
Auto
Manual The user can set the power limit value that indicates the power
supplied by the system.