User`s manual

EDS-P510 Series Featured Functions
3-29
Configuring “Turbo Ring”
Explanation of “Current Status” Items
Now Active
Shows which communication protocol is in use: Turbo Ring, Turbo Ring V2, RSTP, or none.
Master/Slave
Indicates whether or not this EDS is the Master of the Turbo Ring. (This field appears only when selected to
operate in Turbo Ring or Turbo Ring V2 mode.)
NOTE The user does not need to set the master to use Turbo Ring. If no master is set, the Turbo Ring protocol will
assign master status to one of the EDS units in the ring. The master is only used to determine which segment
serves as the backup path.
Redundant Ports Status (1st Port, 2nd Port)
Ring Coupling Ports Status (Coupling Port, Coupling Control Port)
The “Ports Status” indicators show Forwarding for normal transmission, Blocking if this port is connected to
a backup path and the path is blocked, and Link down if there is no connection.
Explanation of “Settings” Items
Redundancy Protocol
Setting Description Factory Default
Turbo Ring Select this item to change to the Turbo Ring configuration page.
Turbo Ring V2 Select this item to change to the Turbo Ring V2 configuration
page.
Turbo Chain Select this item to change the Turbo Chain configuration page.
RSTP (IEEE
802.1W/1D)
Select this item to change to the RSTP configuration page.
(IEEE 802.1W/1D)
None Ring redundancy is not active
Set as Master
Setting Description Factory Default
Enabled Select this EDS as Master
Disabled Do not select this EDS as Master
Not checked