User`s manual

EDS-P510 Series Introduction
1-2
Overview
As the world’s network and information technology becomes more mature, the trend is to use Ethernet as the
major communications interface in many industrial communications and automation applications. In fact, a
whole new industry has sprung up to provide Ethernet products that comply with the requirements of
demanding industrial applications.
The Moxa EtherDevice™ EDS-P510 Series Ethernet switches are Gigabit managed redundant Ethernet
switches that come standard with 4 10/100BaseT(X) 802.3af (PoE) compliant Ethernet ports and 3 combo
Gigabit Ethernet ports. The EDS-P510 Ethernet switches provide up to 15.4 watts of power per PoE port, and
allow power to be supplied to connected devices (such as surveillance cameras, wireless access points, and IP
phones) when AC power is not readily available or cost-prohibitive to provide locally. The EDS-P510 Ethernet
switches are highly versatile, and their SFP fiber port can transmit data up to 80 km from the device to the
control center with high EMI immunity. The Ethernet switches support a variety of management functions,
including Turbo Ring, RSTP/STP, IGMP, VLAN, QoS, RMON, bandwidth management, and port mirroring. The
EDS-P510 series is designed especially for security automation applications such as IP surveillance and gate of
entry systems, which can benefit from a scalable backbone construction and Power-over-Ethernet support.
Package Checklist
The EDS-P510 is shipped with the following items. If any of these items are missing or damaged, please contact
your customer service representative for assistance.
• 1 EDS-P510 EtherDevice Switch
• RJ45 to DB9 console port cable
• Protective caps for unused ports
• DIN-Rail mounting kit (attached to the EDS-P510’s rear panel by default)
• Document and Software CD with User’s Manual and Windows Utility
• Hardware Installation Guide
• Warranty Card
Features
Industrial Networking Capability
• Turbo Ring, Turbo Chain (<20ms recovery time at full load) and STP/RSTP (IEEE 802.1w/D)
• IPv6 ready (IPv6 Logo Committee certified)
• IEEE 1588 PTP (Precision Time Protocol) for precise time synchronization of networks.
• DHCP Option 82 for IP address assignment for different policies.
• Supports Modbus/TCP.
• Supports LLDP (Link Layer Discovery Protocol).
• IEEE 802.3af Power-over-Ethernet Technology.
• 2 combo gigabit Ethernet ports for Redundant Gigabit Ethernet Ring (recovery time < 20 ms at full load)
and RSTP/STP (IEEE802.1W/D), plus 1 combo gigabit Ethernet port for uplinking.
• IGMP Snooping and GMRP for filtering multicast traffic from industrial Ethernet protocols.
• Supports IEEE 802.1Q, tag-based VLAN, GVRP, and port-based VLAN to make network planning easier.
• Supports QoS—IEEE 802.1p/1Q and TOS/DiffServ to increase determinism.
• Supports 802.3ad, LACP for optimum bandwidth utilization.
• Supports IEEE 802.1X and SSL to enhance network security.
• SNMP V1/V2c/V3 for different levels of network management security.
• RMON for efficient network monitoring and proactive capability.