User`s manual

EDS-P510 Series Featured Functions
3-49
VLAN Mode
Setting Description Factory Default
802.1Q VLAN Set VLAN mode to 802.1Q VLAN
Port-based VLAN Set VLAN mode to Port-based VLAN
802.1Q VLAN
Management VLAN ID
Setting Description Factory Default
VLAN ID
ranges from
1 to 4094
Set the management VLAN of this EDS-P510. 1
Port Type
Setting Description Factory Default
Access This port type is used to connect single devices without tags.
Trunk Select “Trunk” port type to connect another 802.1Q VLAN
aware switch or another LAN that combines tagged and/or
untagged devices and/or other switches/hubs.
Access
ATTENTION
For communication redundancy in the VLAN environment, set “Redundant Port,” “Coupling Port,” and
“Coupling Control Port” as “Trunk Port,” since these ports act as the “backbone” to transmit all packets of
different VLANs to different EDS-P510 units.
Port PVID
Setting Description Factory Default
VID range from 1 to
4094
Set the port default VLAN ID for untagged devices that connect
to the port.
1
Fixed VLAN List (Tagged)
Setting Description Factory Default
VID range from 1 to
4094
This field will be active only when selecting the “Trunk” port
type. Set the other VLAN ID for tagged devices that connect to
the “Trunk” port. Use commas to separate different VIDs.
None
Forbidden VLAN List
Setting Description Factory Default
VID range from 1 to
4094
This field will be active only when selecting the “Trunk” port
type. Set the VLAN IDs that will not be supported by this trunk
port. Use commas to separate different VIDs.
None
To configure the EDS-P510’s Port-based VLAN, use the VLAN Setting page to configure the ports.