User`s manual

EDS-P510 Series Featured Functions
3-55
Static Multicast Router Port
Setting Description Factory Default
Select/Deselect Select the option to select which ports will connect to the
multicast routers. It’s active only when IGMP Snooping is
enabled.
Disabled
NOTE At least one switch must be designated the Querier or enable IGMP snooping and GMRP when enabling Turbo
Ring and IGMP snooping simultaneously.
IGMP Table
The EDS-P510 displays the current active IGMP groups that were detected.
The information includes VID, Auto-learned Multicast Router Port, Static Multicast Router Port,
Querier Connected Port, and the IP and MAC addresses of active IGMP groups.
Add Static Multicast MAC
If required, the EDS-P510 also supports adding multicast groups manually.
Add New Static Multicast Address to the List
Setting Description Factory Default
MAC Address Input the multicast MAC address of this host. None
MAC Address
Setting Description Factory Default
integer Input the number of the VLAN to which the host with this MAC
Address belongs.
None
Join Port
Setting Description Factory Default
Select/Deselect Select the appropriate options to select the join ports for this
multicast group.
None