User`s manual

EDS-P510 Series Featured Functions
3-74
Using Event Log
Bootup This field shows how many times the EDS-P510 has been rebooted or cold started.
Date The date is updated based on how the current date is set in the “Basic Setting” page.
Time The time is updated based on how the current time is set in the “Basic Setting” page.
System Startup Time The system startup time related to this event.
Events Events that have occurred.
NOTE The following events will be recorded into the EDS-P510’s Event Log table:
1. Cold start
2. Warm start
3. Configuration change activated
4. Power 1/2 transition (Off ( On), Power 1/2 transition (On ( Off)
5. Authentication fail
6. Topology changed
7. Master setting is mismatched
8. DI 1/2 transition (Off ( On), DI 1/2 transition (On ( Off)
9. Port traffic overload
10. dot1x Auth Fail
11. Port link off / on
12. Power-Fail
13. PD-Failure
Using Syslog
This function provides the event logs for the syslog server. The function supports 3 configurable syslog servers
and syslog server UDP port numbers. When an event occurs, the event will be sent as a syslog UDP packet to
the specified syslog servers.