User`s manual

EDS-P510 Series EDS Configurator GUI
4-6
Import Configuration
The Import Configuration function is used to import an entire configuration from a text file to the EDS-P510.
This utility can be used to transfer the configuration from one EDS-P510 to another, by first using the Export
Configuration function (described in the previous section) to save a switch configuration to a file, and then
using the Import Configuration function. Perform the following steps to import a configuration:
1. Highlight the server (from the Moxa EtherDevice Switch list in the Configurator window’s left pane), and
then click the Import toolbar icon
, or select Import Configuration from the Configuration menu.
2. Use the Open window to navigate to the text file that contains the desired configuration. Once the file is
selected, click Open to initiate the import procedure.
3. The Setup Configuration window will be displayed, with a special note attached at the bottom.
Parameters that have been changed will be activated with a checkmark. You may make more changes if
necessary, and then click OK to accept the changes.
4. Click Yes in response to the following warning message to accept the new settings.