User`s manual

2
2
Chapter 2 Getting Started
In this chapter, we explain how to operate an IA26X-CE computer from a PC. The PC will be
referred to as a development workstation and the IA26X-CE computer will be called the target
computer.
We describe the steps needed for some operations, such as setting the system time, troubleshooting
network connectivity, etc. Some of these operations can be done using system commands after
gaining access to the computer, and others can be done with a web-based management system, as
described in a later chapter.
The following topics are covered in this chapter:
 Powering on the IA260
 Resetting the IA260-CE Computer
 Rebooting the IA260-CE Computer
 Boot Loader
 Operating the IA260-CE Computer via Serial Console
 Changing the Network Settings
 Virtual Private Network (VPN)
 Operating the IA260-CE Computer via Telnet
 User/Group Management
 Adjusting the Time Zone
 Adjusting the System Time
 Starting and Stopping Services
 Troubleshooting Network Connectivity
 Simple Network Management Protocol (SNMP)
¾ SNMP Agent
¾ SNMP Manager
 Accessing Files through File Sharing
 Configuring the FIFO