User`s manual

IA260 WinCE User’s Manual Management Tools
System Information
The first page displays the system information of the IA260-CE computer, including the firmware
version of the computer, .Net CF version, the system time, and system resources, including main
memory and file system usage.
On the General tab, click the Enable Ultra DMA check box to enable or disable Ultra DMA for
the CF card. If the system cannot detect some CF cards, then you should uncheck this box. After
changing this setting, you will need to reboot the system for the new setting to take effect.
Serial Port Configuration
The IA260-CE has 4 high-performance serial ports. When the system starts, specify the default
operation mode (RS-232, RS-422, or RS-485). The factory default mode is RS-232.
Click the COM Ports tab to see the status of the 4 ports.
3-2