User`s manual

IA260 WinCE User’s Manual Management Tools
You can also use SNTP to adjust the time automatically. To do this, check mark the Enable check
box under SNTP, and then click Save Settings.
To maintain normal operation of the computer, some listed services cannot be stopped. Such
services do not have a check box next to them.
Display
The IA260-CE’s VGA output uses a DB15 female CRT connector to display the Windows CE
desktop on an LCD monitor or a CRT monitor. The default settings, which are shown on the
Display tab, are 800*600 for Width*Height, 60 (in Hz) for Frequency, and 16 (bits) for Depth. For
general use, adjust the settings to match the specifications of your LCD or CRT. Click Apply to
save the setting.
Note: You must reboot your IA260-CE for new settings to take effect.
3-4