Installation Guide

- 3 -
Features
Extends the transmission distance of the overall CAN bus system
Converts CAN signals to fiber and vice versa
Supports CAN (or CAN 2.0, including CAN 2.0A and CAN 2.0B) and
its extension CAN FD (CAN Flexible Data Rate); conforms to the
ISO 11898 standard
CAN (CAN 2.0) and CAN FD (ISO CAN FD) arbitration rate (or
nominal bit rate, arbitration bit rate) is up to 1 Mbps; data rate is
up to 5 Mbps
Dual power inputs for redundancy
DIP switch for 120 Ω terminal resistance
Wide temperature range model available for -40 to 75°C
environments (“-T” models)
Supports higher layer CAN protocols such as CANopen, DeviceNet,
SAE J1939, etc.
Supports point-to-point connection to another ICF-1171I
Package Checklist
Before installing the ICF-1171I Series, verify the package contains the
following items:
ICF-1171I Series CAN-to-fiber converter with a DIN -rail kit pre-
locked on it
Quick Installation Guide (printed)
Warranty card
Optional Accessory
WK-30-02: Wall-mounting kit, 2 plates, 4 screws, 30 x 66.8 x 2
mm
NOTE
Please notify your sales representative if any of the above
items are missing or damaged.