User Manual

- 8 -
DIP Switch Settings
The default setting for each DIP switch is OFF.
The following table explains the effect of setting
the DIP switches to the ON positions.
DIP
Switch
Setting Description Max Output
Power
1
802.3af
(ON)
The INJ-24A is forced to
802.3af mode and only accepts
IEEE 802.3af standard devices.
15.4 watts
802.3af/at
(OFF)
The INJ-24A automatically
detects the standard, for both
IEEE 802.3af and IEEE 802.3at
standard devices.
Std PoE: 30 watts
Hi PWR: 36 watts
2 Hi PWR
(ON)
The INJ-24A is set to support
high power output.
36 watts
Std. PoE
(OFF)
The INJ-24A only provides
standard PoE power output.
802.3af: 15.4 watts
802.3af/at: 30
watts
3
4-pair
(ON)
The INJ-24A provides
power via
both data pair (pin 1, 2, 3, and
6) and phantom pair (pin 4, 5,
7, and 8).
60 watts
2-pair
(OFF)
The INJ-24A provides power via
data pair or spare pair.
See DIP Switch 1
and 2
4
Mode A
(ON)
The INJ-24A provides power via
data pair (pins 1, 2, 3, and 6).
See DIP Switch 1
and 2
Mode B
(OFF)
The INJ-24A provides power via
spare pair (pins 4, 5, 7, and 8).
See DIP Switch 1
and 2
NOTE
60-watt PoE is not a standardized application. Check with Moxa
for product compatibility before using 60-watt PoE.