User Manual

- 5 -
Digital Output (Sink)
I/O Mode
DO or Pulse Output
Pulse Output Frequency
5 kHz
Over-voltage Protection
45 VDC
Over-temperature
Shutdown
175°C (min.)
Over-current Protection
1.5 A per channel @ 25°C
Current Rating
500 mA per channel @ 25°C
Isolation
3k VDC or 2k Vrms
Analog Input (ioLogik 2542)
Type
Differential input
Resolution
16 bits
I/O Mode
Voltage / Current (software selectable)
Input Range
±10 V, 0 to 10 V, 0 to 20 mA, 4 to 20 mA (with
burn-out detection)
Accuracy ±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
±0.5% FSR @ -40 and 75°C
Sampling Rate
• All channels: 400 samples/sec
• Per channel: 100 samples/sec
Input Impedance
> 1M ohms (min.)
Built-in Resistor for
Current Input
120 ohms
Warranty
Warranty Period
5 years
Details
See www.moxa.com/warranty
Hardware Installation
I/O Wiring
Digital Inputs/Outputs
Analog Inputs
Mounting
There are two sliders on the back of the unit for DIN rail and wall
mounting.
• Mounting on a DIN rail
Pull out the bottom slider; latch the unit onto the DIN rail, and the
push the slider back in.
• Mounting on a wall (optional)
Pull out both the top and bottom sliders and align the screws
accordingly.