User`s manual

ioLogik E1200 Series Introduction
1-13
Hardware Reference
Panel Guide
NOTE
The
RESET
button restarts the server and resets all settings to factory defaults. Use a pointed object such as
a st
raightened paper clip to hold down the RESET button for 5 seconds
. The factory defaults will be loaded once
the R
EADY LED turns green again. You may then release the RESET button.
Ethernet Port
LED Indicators
LED State Description
Power Amber System power is ON
OFF System power is OFF
Ready Green System is ready
Flashing Flashes every 1 second when the “Locate” function is triggered
Flashing Flashes every 0.5 second when the firmware is being upgraded
Flashing ON/OFF cycle period of 0.5 second represents “Safe Mode”
OFF System is not ready
Port 1 Green Ethernet connection enabled
Flashing Transmitting or receiving data
Port 2 Green Ethernet connection enabled
Flashing Transmitting or receiving data
EXT Green EXT field power input is connected
Off EXT field power input is disconnected