Specifications

ioLogik E1500 Series Using the Web Console
3-9
You can also configure each channel’s digital input mode and parameters by clicking on the channel. DI
channels can operate in DI mode or Event Counter mode.
For Event Counter mode, configure Lo to Hi, Hi to Lo, or Both to trigger the counter. The counter should be
set to either start, or stop. If it is in stop mode, the counter can be activated by the Modbus command. Make
sure that the Counter Filter is not set to 0; otherwise, the counter will never be activated.
The alias name and the logic definition can also be configured on this page.
DO Channels
On the I/O Setting  DO (Digital Output) Channels page, you can configure each DO channel by clicking
on the channel.