User Manual

ManualsBrandsMoxa ManualsComputing & Network ProductsEthernet I/O Module Digital 1x 10/100

P/N: 1802022000010

*1802022000010*

ioLogik E2200 Series

Quick Installation Guide

Smart Ethernet Remote I/O

Edition 1.0, January 2019

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



Summary of content (6 pages)

PAGE 1
ioLogik E2200 Series Quick Installation Guide Smart Ethernet Remote I/O Edition 1.0, January 2019 Technical Support Contact Information www.moxa.
PAGE 2
Package Checklist • • • 1 ioLogik E2200 series remote I/O product Quick installation guide (printed) LDP1602 LCD Module (Optional) Specifications Ethernet Interface 10/100BaseT(X) Ports 1 (RJ45 connector) Magnetic Isolation 1.
PAGE 3
Environmental Limits Operating Temperature Storage Temperature (package included) Ambient Relative Humidity Altitude Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) -40 to 85°C (-40 to 185°F) 5 to 95% (non-condensing) 2000 m (Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
PAGE 4
I/O Wiring Diagrams Contact Type Power Source Requirement A dry Contact does not need to be connected to a Dry Contact power source to function properly.* A wet Contact must be connected to a power source Wet Contact to function properly. *Some users connect dry contacts to a power source for added stability. Depending on your application, you can decide whether or not to connect your dry contacts to power sources.
PAGE 5
Mounting There are two ways to mount the ioLogik E2200 Series: DIN rail or wall mounting. • • Mounting on a DIN rail Pull out the bottom slider; latch the unit onto the DIN rail, and then push the slider back in. Mounting on a wall Pull out both the top and bottom sliders and align the screws accordingly. The heads of the screws should be less than 6.0 mm in diameter, and the shafts should be less than 3.5 mm in diameter, as shown in the figure.
PAGE 6
How to Download the Software Step 1: Click on the following link to open the Support & Downloads search tool: http://www.moxa.com/support/support_home.aspx?isSearchShow=1 Step 2: Type the model name in the search box or select a product from the drop down box and then click Search. Step 3: Click the Software Packages link to download the latest software for the product.