User`s manual

ioLogik Active Ethernet I/O Family User’s Manual Using the Built-in Web Console
4-3
Entering the Web Console
Modular ioAdmin utility is the main configuration interface for the ioLogik Active Ethernet modular
I/O. However, for the ioLogik E4200 Active Ethernet network adaptor’s web console, information
for basic system status is available.
Enter the IP address of the Active Ethernet Modular I/O in Internet Explorer.
The default IP listed as below:
LAN Port Default IP Address Default Netmask Default Gateway
LAN 0 192.168.127.254 255.255.255.0 None
LAN 1 192.168.126.254 255.255.255.0 None
Overview
When you log into the web console with the ioLogik E4200 IP address, you will see the welcome
page. The page includes basic information for the ioLogik E4200 such as network adaptor model
name, serial number, firmware version, and IP and MAC addresses. It also shows you the
information of the GSM modem and status.
ATTENTION
The web console only supports Moxa OnCell 2110 and 2150 GPRS modem.
Also, auto detection is only available for the GSM modem when using SMS in the Click&Go
ruleset. The default serial baud rate is 115,200 bps, and parameters are N, 8, 1.