ioLogik R1200 Series Quick Installation Guide RS-485 Remote I/O Edition 4.0, December 2016 Technical Support Contact Information www.moxa.
Package Checklist • • 1 ioLogik R1200 series remote I/O product Quick installation guide (printed) Specifications System Serial IO Protection Protocols Power Input Wiring Dimensions Weight Operating Temperature 2 x RS-485-2W: Data+, Data-, GND (5-contact terminal block) 8 KV ESD, 1 KV surge, 3 KV EFT Modbus/RTU 24 VDC nominal, 12 to 48 VDC I/O cable max. 14 AWG 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.
Over-temperature Shutdown Current Rating Isolation Relay Output Type Contact Rating Inductance Load Resistance Load Breakdown Voltage Relay On/Off Time Initial Insulation Resistance Expected Life Initial Contact Resistance Pulse Output Analog Input Type Resolution I/O Mode Input Range Accuracy Sampling Rate (all channels) Input Impedance Built-in Resistor for Current Input Analog Output Resolution Output Range Voltage Output Accuracy Load Resistor 175°C (typical), 150°C (min.
I/O Wiring Digital Input/Output (Sink Type) Analog Input Relay Output (Form A) NOTE A “load” in a circuit schematic is a component or portion of the circuit that consumes electric power. For the diagrams shown in this document, “load” refers to the devices or systems connected to the remote I/O unit. Mounting The ioLogik R1200 is designed with a vertical form factor, and can be used with both DIN-Rail and wall mounting applications.
NOTE For safety reasons, the wires attached to the power should be at least 2 mm (12 gauge) in diameter. Switch Settings The R1200 series provides Dual/Rep and Run/Initial switch settings to set up the communication mode.
3. Select “Load Factory Default” from the web console. Modbus Address Table Please refer to the user’s manual for details of the ioLogik’s Modbus address. How to Download the Software Step 1: Click on the following link to open the Support & Downloads search tool: http://www.moxa.com/support/support_home.aspx?isSearchShow=1 Step 2: Type the model name in the search box or select a product from the drop down box and then click Search.