User Manual

- 4 -
I/O Wiring
Digital Input/Output
(Sink Type)
Analog Input
Relay Output (Form A)
NOTE
A “load” in a circuit schematic is a component or portion of the
circuit that consumes electric power. For the diagrams shown in
this document, “load” refers to the devices or systems connected
to the remote I/O unit.
Mounting
The ioLogik R1200 is designed with a vertical form factor, and can be used
with both DIN-Rail and wall mounting applications. When mounting on a
rail, release the bottom mounting kit, install the ioLogik on the rail, and
then restore the bottom mounting kit to fix the ioLogik to the rail. When
using wall mounting, release both the upper and bottom DIN-Rail kits.
Power and Networking
Connect the +12 to +48 VDC
power line to the ioLogik R1200’s
terminal block
V+ terminal;
connect the ground from the
power supply to the V
- terminal.
Connect the ground pin (
) if
earth ground is available.