User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
101
Configure the following settings.
Enable
Setting
Description
Factory Default
Enabled
Enable Spanning Tree.
Disabled
Disabled
Disable Spanning Tree.
Edge
Setting
Description
Factory Default
Auto
Automatically detect to be the edge port.
Auto
Yes
Set as an edge port.
No
Do not set as an edge port.
Priority
Setting
Description
Factory Default
0 to 255 (multiples of
16)
Increase the priority of a port by selecting a lower number. A
port with a higher priority has a greater chance of being a root
port.
128
Path Cost
Setting
Description
Factory Default
0 to 20000000
The path cost value will be automatically assigned according
to the different port speed if the value is set to zero.
0
Link Type
Setting
Description
Factory Default
Force True
Set to Force True when port operating in full-duplex mode,
such as a switch.
Auto
Force False
Set to Force False when port operating in half-duplex mode,
such as a hub.
Auto
Automatically select Force True or Force False mode.
Copy Config to Ports
Setting
Description
Factory Default
Select the port(s) from
the drop-down list
Copy the configurations to other port(s). None