User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
112
There are two points to note:
1. Two Chain ports must have the same PVID.
2. Chain ports must join the untagged members of PVID VLAN before being assigned to be a Chain port.
Turbo Chain V2 Settings and Status
First select Turbo Chain on the menu and then click Setting.
Configure the following settings.
Enable
Setting
Description
Factory Default
Enabled
Enable Turbo Chain.
Disabled
Disabled
Disable Turbo Chain.
Chain Role
Setting
Description
Factory Default
Head
Enable chain role as the Head.
Member
Member
Enable chain role as a Member.
Tail
Enable chain role as the Tail.
Head/Member/Tail Port
Setting
Description
Factory Default
Select the port from the
list
Specify the port as the Head/Member/Tail port. 1/1
Member Port
Setting
Description
Factory Default
Select the port from the
list
Specify the port as the member port. 1/2
When finished, click APPLY to save your changes.