User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
115
Secondary Port
Setting
Description
Factory Default
Select the port from the
list
Specify the port as the secondary port. 1/1
Path Switching Mode
Setting
Description
Factory Default
Primary path always
first
Always selects path switching mode as the primary path first.
Primary path always
first
Maintain current path
Always selects the path switching mode to maintain the
current path.
When finished, click APPLY to save your changes.
First, click Dual Homing in the menu and then select Status to view the current Dual Homing Settings.
Refer to the following table for a detailed description of each item.
Item
Description
Path
Primary: The primary path of dual homing.
Secondary: The secondary path of dual homing.
Port
The port that is used as the primary/secondary path.
Link Status
Link Up: The port is connected.
Link Down: The port is disconnected.
Port State
Forwarding: The port is forwarding traffic.
Blocking: The port is blocking traffic.
Management
This section describes how to configure Network Management including SNMP and SNMP Trap/Inform.