User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
123
Configure the following settings.
HTTP
Setting
Description
Factory Default
Enabled
Enable the HTTP connection.
Enabled
Disabled
Disable the HTTP connection.
NOTE
An HTTP session will be redirected to HTTPs if both HTTP and HTTPs are enabled.
HTTP – TCP Port
Setting
Description
Factory Default
0 to 47808
Specify the HTTP connection port number.
80
HTTPS
Setting
Description
Factory Default
Enabled
Enable the HTTPS connection.
Enabled
Disabled
Disable the HTTPS connection.
HTTPS – TCP Port
Setting
Description
Factory Default
1 to 65535
Specify the HTTP connection port number.
443
Telnet
Setting
Description
Factory Default
Enabled
Enable a Telnet connection.
Disabled
Disabled
Disable a Telnet connection.
Telnet – TCP Port
Setting
Description
Factory Default
1 to 65535
Specify the Telnet connection port number.
23
SSH
Setting
Description
Factory Default
Enabled
Enable the SSH connection.
Enabled
Disabled
Disable the SSH connection.
SSH – TCP Port
Setting
Description
Factory Default
1 to 65535
Input the SSH connection port number.
22
SNMP
Setting
Description
Factory Default
Enabled
Enable the SNMP connection.
Disabled
Disabled
Disable the SNMP connection.
SNMP – Port
Setting
Description
Factory Default
0 to 47808
Input the SNMP connection port number.
161
Moxa Service
Setting
Description
Factory Default
Enabled
Enable Moxa Service.
Enabled
Disabled
Disable Moxa Service.
When you enable a non-secure protocol, such as telnet, a warning screen will appear. Click CONFIRM to
make sure you want to enable the protocol.