User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
133
Quiet Period (sec.)
Setting
Description
Factory Default
0 to 65535
Specify the duration of time that the switch remains in the
quiet state following a failed authentication exchange with the
client.
60
Reauthentication
Setting
Description
Factory Default
Enabled
Enable re-authentication.
Disabled
Disabled
Disable re-authentication.
Reauth Period (sec.)
Setting
Description
Factory Default
1 to 65535
Input the duration of time between re-authentication
attempts.
3600
Server Timeout (sec.)
Setting
Description
Factory Default
1 to 65535
Input the duration of time that the switch will re-transmit the
packets from the switch to the authentication server.
30
Supp (Supplicant, such as Client PC) Timeout (sec.)
Setting
Description
Factory Default
1 to 65535
Input the duration of time that the switch will re-transmit the
packets from the switch to the client.
30
Tx Period (sec.)
Setting
Description
Factory Default
1 to 65535
Input the duration of time that the switch will re-transmit the
data to the client.
30
Copy Config to Ports
Setting
Description
Factory Default
Select the port(s) from
the drop-down list
Allows users to copy configurations to other port(s). None
When finished, click APPLY to save your changes.
IEEE 802.1X Database
RADIUS
RADIUS Remote Authentication Dial in User Service is a protocol that involves three services in one
network protocol: Authentication, Authorization, and Accounting (AAA). The protocol operates on port 1812,
and the AAA management for users connecting to a network service.
RADIUS is based on a client/server protocol that runs in the application layer, and can use either TCP or
UDP as the mode of transport. The network access servers that contain the RADIUS protocol can allow the
client to communicate with the RADIUS server. Through Authentication, Authorization, and Accounting,
RADIUS is used to monitor access to the network.