User Manual

Moxa’s Managed Switch Next Generation OS (v3.x) User Manual
147
Configure the following settings.
Access List Type
Setting
Description
Factory Default
IP-based
Specify IP-based as the access list type.
None
MAC-based
Specify MAC-based as the access list type.
Index (For IP-based type)
Setting
Description
Factory Default
Select from IP-1 to IP-
16
Select from the drop-down list for index. None
Index (For MAC-based type)
Setting
Description
Factory Default
Select from MAC-1 to
MAC-16
Select from the drop-down list for index. None
Name
Setting
Description
Factory Default
0 to 127 characters
Provide a name for this access list.
None
IP-based ACL Table Configurations
Configure the following settings for the IP-based access list.
Active Interface Type
Setting
Description
Factory Default
Port-based
Specify Port-based as the active interface type.
None
VLAN-based
Specify VLAN-based as the active interface type.
Active Ingress Ports (For Port-based type)
Setting
Description
Factory Default
Select the port(s) from
the drop-down list
Select the port(s) as the active ingress port(s). None
Active Ingress VLAN (For VLAN-based type)
Setting
Description
Factory Default
Select the port(s) from
the drop-down list
Select the port(s) as the active ingress VLAN. None
When finished, click APPLY to save your changes.